Hydrocarbon resins

SUKOREZ HYDROGENATED HC RESINS for HMA, HMPSA, PP film modifier

Key Characteristics:

  • Excellent initial colour
  • Excellent colour stability to heat and UV
  • Good compatibility with EVA and SBC
  • Low volatility and low odour
  • Water resistance

  SOFTENING POINT APPLICATIONS CHARACTERISTICS
  °C    
       
SU-90 85 - 95 HMPSA Low SP, water white
SU-100 100 - 109 HMA, HMPSA General Purpose, Water white
SU-110 110 - 115 HMA Water white
SU-120 116 - 125 HMA, HMPSA High SP, water white
SU-130 126 - 135 PP film modifier Highest SP, water white
SU-200 97 - 106 HMA, HMPSA Light colour
SU-210 107 - 114 HMA, HMPSA Higher SP, light colour
SU-490 85 - 95 HMPSA Modified C9 resin, water white
SU-400 95 - 105 HMA, HMPSA Highly modified C9 resin, water white

HMA = Hot Melt Adhesives
HMPSA = Hot Melt Pressure Sensitive Adhesives
SP = Softening Point


HIKOREZ ALIPHATIC HC RESINS for HMA, HMPSA, HMRM, SBA, TAPES

Key Characteristics:

  • Good compatibility with natural rubber and synthetic rubber
  • Solubility in various solvents
  • Good electrical properties
  • Low volatility and low odour
  • Water resistance

  SOFTENING POINT APPLICATIONS CHARACTERISTICS
  °C    
       
A-1100 94 - 102 HMA, HMPSA, HMRM General purpose
C-1100 94 - 102 HMRM, SBA High molecular weight
H-2100 97 - 106 HMA, HMPSA Good heat stability
H-2110 107 - 114 HMPSA High SP, good stability

HMA = Hot Melt Adhesives
HMPSA = Hot Melt Pressure Sensitive Adhesives
HMRM = Hot Melt Road Marking
SBA = Solvent Based Adhesives
SP = Softening Point


HIKOTACK AROMATIC HC RESINS for HMA, SBA, PAINTS, PRINTING INKS

Key Characteristics:

  • Various softening points
  • Wide compatibility with other resins (e.g. Phenolic-, Epoxy- and Alkyd resins)
  • Good compatibility with synthetic rubbers and elastomers (e.g. SBR, EVA)
  • Water resistance

  SOFTENING POINT APPLICATIONS CHARACTERISTICS
  °C    
       
P-90 90 - 100 HMA, SBA, EP, AP Low SP
P-90HS 95 - 105 HMA, SBA, EP, AP Higher SP than P-90
P-120 115 - 125 HMA, SBA, PI, EP, AP General purpose
P-120HS 126 - 130 SBA, EP, AP Higher SP than P-120
P-140 140 - 150 HMA, SBA, PI, EP High SP
P-150 150 - 160 SBA, EP High SP

HMA = Hot Melt Adhesives
SBA = Solvent Based Adhesives
SP = Softening Point
PI = Printing Inks
EP = Epoxy Paints
AP = Alkyd Paints